ED Ice Maker Adapter Kit Installation Instructions Manual
© 2016, Cornelius Inc. - 3 - Publication Number: 629087971TENS
6. Remove merchandiser from dispenser by lifting up then pulling out. Set merchandiser aside.
7. Adjust the automatic agitator timing settings (located in the dispenser’s electrical box) to 2 seconds ON, 3 hours
OFF. See Figure 3.
Figure 3.
8. Re-install the merchandiser back onto the dispenser.
9. Set Icemaker onto the adapter kit. See Figure 4 and Figure 5 for location dimensions.
Figure 4. ED/DF 1XX and 2XX
DIM. "A"
REF
DISPENSER ICEMAKER DIM "A"
150 HCD1000RN 1-9/16
150 HCD1400RN 1-9/16
175 HCD1000RN 2-13/16
175 HCD1400RN 2-13/16
2XX HCD1000RN 5-9/16
2XX HCD1400RN 5-9/16
2XX HCC1400AW 3/8
2XX HCC1000AW 1-7/8
REAR OF DISPENSER
LEFT SIDE
OF DISPENSER
TOP VIEW
ICEMAKER MOUNTING DETAILS
ICEMAKER BASE
OUTLINE
ICEMAKER FLUSH WITH
REAR OF ADAPTER KIT
Ø 3.0”
To Next Page
Loading...
