Cornwell Tools CTG5000 User Manual

CTG2000 / CTG3000 / CTG5000 1 09/20/19
Copyright © Professional Tool Products,
2019 All rights reserved
OPERATING INSTRUCTIONS
PLEASE NOTE
CTG2000 / CTG3000 / CTG5000
1/4", 3/8", & 1/2" Digital Torque Wrench
1: The accuracy of the readout is guaranteed from 20% to 100% of maximum range + /- 1 increment. The torque accuracy is a typical
value. Calibration point is at the middle line of the five anti-slip lines on the rubber handle. To maintain the accuracy of the
torque wrench, calibration should be performed once a year or every 5,000 cycles, whichever comes first. Accuracy is based on
the zero degree of offset from perpendicular drive.
2: Use two AA batteries
Model
Number
CTG2000
CTG3000
CTG5000
Square
Drive
1/4"
3/8"
1/2"
MIN.
Operating
Torque
1.1 ft-lbs
5 ft-lbs
15.1 ft-lbs
MAX.
Operating
Torque
22.1 ft-lbs
99.5 ft-lbs
302.3 ft-lbs
Length
15½"
16¾"
25¾"
Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . (CW ±2%) (CCW ±3%)
Data Memory Values .................................. 50
Number of Presets...................................... 9
Operation Modes ............................Peak Hold/Track
Unit Selection .......................ft-lb, in-lb, N-m, & kg-cm
Head Type ....................................Flex Ratchet
Gear teeth .......................................... 36
Buttons .............................................. 5
Batteries ...........................................2 AA
Battery Life-Continuous Operation ..................... 110 Hrs
Battery Life-Standby .................................1 Year
Operating Temperature .........................14ºF ~ 140ºF
Storage Temperature ........................... -4ºF ~ 158ºF
Humidity ......................... Up to 90% non-condensing
SPECIFICATIONS
CTG2000
CTG3000
CTG5000

Cornwell Tools CTG5000 Specifications

General

Brand	Cornwell Tools
Model	CTG5000
Category	Power Tool
Language	English

Summary

Product Specifications

Safety and Warnings

Important Safety Instructions

Critical safety information and warnings to prevent injury or damage.

Methods to Avoid Hazardous Situations

Guidelines and precautions to ensure safe operation and prevent accidents.

Consequences of Hazardous Situations

Potential outcomes of not following safety guidelines and warnings.

Features and Setup

Features and Functions Overview

Identification and explanation of the torque wrench's components and buttons.

Battery Installation

Step-by-step guide for inserting batteries into the torque wrench.

Initial Setup and Operation

Instructions for powering on, resetting, sleep mode, and unit selection.

Operating Modes and Torque Setting

Setting and Resetting Torque Values

How to adjust and store desired torque values using preset memory.

Track and Peak Hold Modes

Explanation of Track and Peak Hold modes for monitoring torque application.

Peak Hold Mode Management

Storing and Viewing Peak Values

Procedure for saving and retrieving peak torque readings.

Deleting Peak Hold Data

Instructions for deleting individual or all stored peak hold values.

Warranty and Service Information

Warranty Coverage Details

Information on the limited 12-month warranty for digital torque wrenches.

Warranty Service and Exclusions

Contact information for service and limitations of the warranty terms.