Cornwell Tools CTG2000ANG - User Manual

CTG2000ANG/CTG3000ANG/CTG5000ANG 1 Rev. 03/15/17
Operating Instructions • Warning Information • Parts Breakdown
Copyright © Professional Tool Products, 2017
All rights reserved
Accuracy (*1).................(CW ±2%) (CCW ±3%)
Angle Accuracy (*2) ..............±2º for 90º rotation
Data Memory Values.......................... 50
Number of Presets..............................9
Operation Modes ..................Peak Hold/Track
Unit Selection ......N-m, in-lb, ft-lb, kg-cm & Degrees
Head Type ...........................Flex Ratchet
Gear teeth ..................................36
Buttons.......................................5
Batteries...................................2 AA
Battery Life-Continuous Operation (*3) .........60 Hrs
Battery Life-Standby (*3) .....................1 Year
Operating Temperature ................14ºF ~ 140ºF
Storage Temperature ..................-4ºF ~ 158ºF
Humidity ...............Up to 90% non-condensing
SPECIFICATIONS
* See Notes on Page 2
CTG2000ANG
CTG3000ANG
CTG5000ANG
1/4", 3/8", & 1/2"Dr.
Digital Torque
Wrench with
Angle Indicator
Model
Number
CTG2000ANG
CTG3000ANG
CTG5000ANG
Square
Drive
1/4"
3/8"
1/2"
MIN.
Operating
Torque
1.1 ft-lbs
5 ft-lbs
15.1 ft-lbs
MAX.
Operating
Torque
22.1 ft-lbs
99.5 ft-lbs
302.3 ft-lbs
Length
15.4"
16.75"
25.75"
ALWAYS READ
INSTRUCTIONS
BEFORE USING
TOOLS
ALWAYS WEAR
SAFETY GOGGLES
NOT
WATERPROOF
WARNING

Summary

SPECIFICATIONS

FEATURES AND FUNCTIONS

BATTERY INSTALLATION

Instructions for inserting and securing AA batteries.

SET UP

POWER ON AND RESETTING

Steps for powering the wrench on and performing a reset.

SLEEP MODE

Explanation of the automatic power-saving sleep mode.

LOW BATTERY VOLTAGE PROTECTION

Details the low battery indicator and auto shut-off.

SELECTING UNITS OF MEASURE

SETTING TORQUE VALUES

RESETTING PRESET TORQUE VALUES

SELECTING TRACK AND PEAK MODES

TRACK MODE

How to use Track mode for monitoring applied load with visual/auditory aids.

PEAK HOLD MODE

STORING PEAK HOLD VALUES

Steps for storing individual torque values in Peak Hold mode.

VIEWING PEAK HOLD VALUES

Procedures for accessing and navigating stored Peak Hold values.

DELETING PEAK HOLD VALUES

DELETING A PEAK HOLD VALUE

Instructions for removing a single stored peak hold value.

DELETING ALL PEAK HOLD VALUES

Steps to clear all stored peak hold values from memory.

USING ANGLE FUNCTION

SETTING ANGLE VALUES

How to select and set angle measurement values.

RESETTING PRESET ANGLE VALUES

Process for changing pre-installed angle preset values.

USING ANGLE MODE

Explanation of the Angle Mode for rotating fasteners to specific degrees.

STORING ANGLE VALUES

TROUBLESHOOTING

ERROR CODES FOR ANGLE FEATURE TORQUE WRENCHES

Lists error codes, causes, corrective actions, and comments.

VIEWING AND DELETING ANGLE VALUES

WARRANTY

DIGITAL TORQUE WRENCH - LIMITED 12-MONTH WARRANTY

Outlines warranty period, exclusions, and service contact.

Cornwell Tools CTG2000ANG Specifications

General

Brand	Cornwell Tools
Model	CTG2000ANG
Category	Power Tool
Language	English