CTG2000ANG/CTG3000ANG/CTG5000ANG 13 Rev. 03/15/17
WARRANTY
DIGITAL TORQUE WRENCH - LIMITED 12-MONTH WARRANTY
Cornwell Tools warrants to the original purchaser that the company’s digital torque wrenches are free from defects
in material or workmanship during the one year warranty period. We will repair any digital torque wrench which
fails to give satisfactory service due to defective workmanship or materials (excluding calibration) for 12 months from
the date of original purchase. (Calibration is only covered by this warranty for each new unused torque wrench out
of box.) Products must be returned with proof of purchase, freight prepaid, to the warranty service center listed
below.
This warranty excludes torque wrenches which have been subjected to abnormal use, accident, neglect, or lack of
maintenance. Any modification, disassembly of this wrench (beyond replacing the head kit), or repair by an
unauthorized service center will void the warranty.
This warranty gives you specific rights. You may also have other rights which vary from state to state.
The foregoing obligation is Cornwell Tools' sole liability under this or any implied warranty and under no circumstances
shall Cornwell Tools be liable for any incidental or consequential damages.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages so the above
limitation or exclusion may not apply to you.
For Warranty Service and Recalibration/Certification Services, contact:
Power Tool Repair
891 Moe Dr. Suite H
AKRON,OH 44310
Phone: 330-630-0022 Fax: 330-630-3320
To Previous Page
Loading...
