Cornwell Tools CTG5000ANG User Manual

CTG2000ANG/CTG3000ANG/CTG5000ANG 1 Rev. 03/15/17
Operating Instructions • Warning Information • Parts Breakdown
Copyright © Professional Tool Products, 2017
All rights reserved
Accuracy (*1).................(CW ±2%) (CCW ±3%)
Angle Accuracy (*2) ..............±2º for 90º rotation
Data Memory Values.......................... 50
Number of Presets..............................9
Operation Modes ..................Peak Hold/Track
Unit Selection ......N-m, in-lb, ft-lb, kg-cm & Degrees
Head Type ...........................Flex Ratchet
Gear teeth ..................................36
Buttons.......................................5
Batteries...................................2 AA
Battery Life-Continuous Operation (*3) .........60 Hrs
Battery Life-Standby (*3) .....................1 Year
Operating Temperature ................14ºF ~ 140ºF
Storage Temperature ..................-4ºF ~ 158ºF
Humidity ...............Up to 90% non-condensing
SPECIFICATIONS
* See Notes on Page 2
CTG2000ANG
CTG3000ANG
CTG5000ANG
1/4", 3/8", & 1/2"Dr.
Digital Torque
Wrench with
Angle Indicator
Model
Number
CTG2000ANG
CTG3000ANG
CTG5000ANG
Square
Drive
1/4"
3/8"
1/2"
MIN.
Operating
Torque
1.1 ft-lbs
5 ft-lbs
15.1 ft-lbs
MAX.
Operating
Torque
22.1 ft-lbs
99.5 ft-lbs
302.3 ft-lbs
Length
15.4"
16.75"
25.75"
ALWAYS READ
INSTRUCTIONS
BEFORE USING
TOOLS
ALWAYS WEAR
SAFETY GOGGLES
NOT
WATERPROOF
WARNING

Cornwell Tools CTG5000ANG Specifications

General

Model	CTG5000ANG
Category	Power Tool
Type	Angle Grinder
Power Source	Corded Electric
Wheel Diameter	5 inches
Length	12 inches
Voltage	120V
Spindle Thread	5/8-11

Summary

SPECIFICATIONS

WARNING - FOLLOW THESE RULES FOR SAFE OPERATION!

SET UP

POWER ON AND RESETTING

Instructions for powering on, resetting the unit, and handling startup conditions.

SELECTING UNITS OF MEASURE

SETTING TORQUE VALUES

How to adjust and set the desired torque value using the Up/Down arrow buttons.

USING ANGLE FUNCTION

SETTING ANGLE VALUES

USING ANGLE MODE

TROUBLESHOOTING

ERROR CODES

Explanation of error codes, causes, and corrective actions for the angle feature.

WARRANTY