EVOSHAKE 500 v2 - 8 -
3.7 Position of labels
1. Type shield (2.4 Identifying information on page 4)
2. Label “General warnings”
3. Label “PROG STOP”
4. Label “Place the can”
5. Label “Warning max can size”
6. Label “Electrical danger”
7. Label “Serial Number”
dd
Do not remove or make illegible the safety or instruction labels. Replace any label has become illegible or is
missing, by requesting it to the manufacturer.
Figure 3-5: Position of the labels.
To Next Page
Loading...