Corsair FLASH VOYAGER User Manual

Hi-Speed USB Portable Flash Disk User’s Manual Guide
Page 2
Features & Specifications
¾ Secure removable data storage for business and personal use
¾ Full Compliance with the Universal Serial Bus Specification v2.0 and v1.1
¾ Hi-Speed Read Performance of up to 20MBytes/sec*
¾ Hi-Speed Write Performance of up to 15MByte/sec*
¾ Mass Storage Device class compatible with driverless support for Windows
ME, 2000, XP, Mac 9.1 or above. (Driver for Windows 98 use is included.)
¾ USB Flash Disk Utility Program for security and partitioning functions (No
additional drivers needed)
¾ Bus Powered – no separate power supply or battery required
¾ State-of-the-art NAND Flash Memory
¾ Shock resistant, noise-free and long data retention
¾ Advanced power management mechanism
Note: The read/write performance of your Corsair Flash Voyager USB 2.0
Flash Drive depends on the configuration of your computer, its processor,
memory and USB interface.
System Requirements
¾ Windows 98, ME, 2000, XP, Mac OS 9.1 or above
¾ AMD or Intel Pentium 133MHz or faster based computer
¾ Built-in USB 1.1 or Hi-Speed USB 2.0 port
Note: If you are running Windows 2000 or Windows XP and your computer
has a Hi-Speed USB 2.0 port, it is advised that you install the Windows
Service Pack. Please refer to the Microsoft Knowledge Base website:
http://support.microsoft.com/default.aspx?scid=kb;en-us;312370
Note: You can purchase a Hi-Speed USB 2.0 Host PCI add-on card if your
computer does not have a built-in USB port. If you are using a Notebook PC,
a Hi-Speed USB 2.0 Host PCMCIA can be purchased to add this functionality.

Corsair FLASH VOYAGER Specifications

General

Connector Type	USB Type-A
Operating Temperature	-20°C to 60°C
Capacity	16GB, 32GB, 64GB, 128GB
Storage Temperature	-20°C to 85°C
Compatibility	Windows, Mac, Linux