Corsair H105 User Manual

• To replace the colored accent ring, use a small flathead
screwdriver to pry out the default metallic grey ring at
three corners, located as shown in figure 1.
• Then merely press the replacement ring of choice into
place, as shown in figure 2.
figure 1
figure 2
Replacing the Colored Accent Ring
/
QUICK START GUIDE
TM
EXTREME-PERFORMANCE 240MM LIQUID CPU COOLER

Corsair H105 Specifications

General

Radiator Size	240mm
Fan Size	120mm
Pump	High-performance pump
Radiator Material	Aluminum
Fan Dimensions	120mm x 120mm x 25mm
Fan Speed	2000 RPM
Warranty	5 years
Type	Liquid Cooling System
Compatibility	Intel LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011-3
Cooling Performance	High-performance cooling
Radiator Dimensions	272mm x 120mm x 38mm

Summary

Included Hardware

Intel Installation

Installing the Intel Backplate

Guide for installing the backplate for Intel CPU sockets, noting differences for LGA 115X and LGA 1366.

Installing Intel Standoff Screws

Instructions for attaching standoff screws for Intel LGA 115X/1366 and LGA 2011.

Installing the Fans and Radiator

Steps to attach the radiator and fans to the PC case, recommending air-intake for optimal cooling.

Installing the Pump Unit

Procedure for mounting the CPU cooler's pump unit onto the motherboard.

Connect Power to the Fans and Pump

Guide for connecting the pump power cable and fan Y-header cables to the motherboard.

AMD Installation

Installing AMD Standoff Screws

Instructions for installing AMD standoff screws using the stock motherboard backplate.

Installing the AMD Mounting Bracket

Steps to remove the Intel bracket and install the AMD mounting bracket onto the pump.

Installing AMD Fans and Radiator

Steps to attach the radiator and fans for AMD systems, recommending air-intake.

Installing the AMD Pump Unit

Procedure for mounting the CPU cooler's pump unit onto the motherboard for AMD systems.

Connect AMD Power to Fans and Pump

Guide for connecting power cables for AMD systems, using motherboard fan headers.