To Next PageTo Next Page
Need help?Do you have a question about the Corsair Hydro H150i PRO and is the answer not in the manual?
General| Radiator Size | 360mm |
|---|---|
| Radiator Material | Aluminum |
| Radiator Dimensions | 396mm x 120mm x 27mm |
| Fan Size | 120mm |
| Number of Fans | 3 |
| Fan Airflow | 75 CFM |
| Fan Noise Level | 25 dBA |
| RGB Lighting | Yes |
| Tube Length | 380mm |
| Warranty | 5 years |
| Compatibility | Intel LGA 1150, 1151, 1155, 1156, 1366, 2011, 2066; AMD AM4, AM3, TR4 |
| Pump Speed | 2400 RPM ± 10% |
Installs the Intel backplate onto the motherboard for CPU cooler mounting.
Attaches the Intel standoff screws to the motherboard for cooler installation.
Mounts the radiator and fans to the PC case for cooling.
Secures the pump unit onto the installed standoff screws.
Connects pump and fan power to SATA and motherboard headers.
Connects the pump to a motherboard USB header for software control.
Installs the AMD mounting bracket onto the motherboard for CPU cooler mounting.
Mounts the radiator and fans to the PC case for cooling.
Prepares the mounting bracket with AMD screw clips for installation.
Secures the pump unit onto the AMD mounting bracket.
Connects pump and fan power to SATA and motherboard headers.
Connects the pump to a motherboard USB header for software control.
Identifies fan air flow direction using an arrow indicator.
Explains whether pre-applied thermal paste can be reused for re-installation.
Provides information on buying additional screws for push/pull configurations.
