Name: Corsair K70 PRO MINI
Brand: Corsair
Rating: 5 (1 reviews)

To Next Page

To Previous Page

CONNECTING VIA BLUETOOTH WIRELESS

1. Initiate Bluetooth pairing on the host device such as a phone or tablet (Bluetooth 4.0 or higher)*

2. Start Bluetooth host pairing on the keyboard, up to three devices can be paired (see below)

3. Input the code from the Bluetooth device screen on the keyboard if requested

4. When pairing completes, the Bluetooth shortcut key turns solid blue for 3 seconds

*Bluetooth host device must support standard keyboard HID input.

SHORTCUT FUNCTION ON-KEY INDICATION STATUS

FN + (Press)

Switch to Bluetooth host 1 mode

Solid Blue (3 sec) Connected

Pulsing Blue Disconnected

FN + (Hold)

Start Bluetooth host 1 pairing* Rapidly Blinking Blue Pairing

FN + (Press)

Switch to Bluetooth host 2 mode

Solid Blue (3 sec) Connected

Pulsing Blue Disconnected

FN + (Hold)

Start Bluetooth host 2 pairing* Rapidly Blinking Blue Pairing

FN + (Press)

Switch to Bluetooth host 3 mode

Solid Blue (3 sec) Connected

Pulsing Blue Disconnected

FN + (Hold)

Start Bluetooth host 3 pairing* Rapidly Blinking Blue Pairing

CONNECTING VIA USB WIRED

1. Connect the keyboard via USB cable to a USB 3.0 Type-A port or better

2. The keyboard will automatically switch to USB wired mode

3. Go to iCUE device settings to select up to 8,000Hz hyper-polling with

CORSAIR AXON*

NOTE: Wireless modes can be switched to at any time by pressing a wireless shortcut. Pressing

the same shortcut again will switch back to USB wired mode.

*Up to 8,000Hz hyper-polling is supported on PC and Mac. Xbox and PlayStation consoles support up to

1,000Hz polling only.

ENGLISH

Other manuals for Corsair K70 PRO MINI

Questions and Answers:

Need help?

Do you have a question about the Corsair K70 PRO MINI and is the answer not in the manual?

General