To Next PageTo Next Page
Need help?Do you have a question about the Corsair RM650x and is the answer not in the manual?
General| Total power | 650 W |
|---|---|
| Input current | 10 - 5 A |
| AC input voltage | 100 - 240 V |
| AC input frequency | 47 - 63 Hz |
| Combined power (+12V) | 648 W |
| Combined power (-12V) | 9.6 W |
| Combined power (+3.3V) | 130 W |
| Combined power (+5Vsb) | 15 W |
| Max output current (+12V) | 54 A |
| Max output current (-12V) | 0.8 A |
| Max output current (+3.3V) | 25 A |
| Max output current (+5Vsb) | 3 A |
| Cabling type | Fully-Modular |
| Motherboard power connector | 20+4 pin ATX |
| Motherboard power cable length | 610 mm |
| Peripheral (Molex) power connectors (4-pin) | 4 |
| Purpose | PC |
| Silent mode | Yes |
| Bearing technology | Rifle |
| 80 PLUS certification | 80 PLUS Gold |
| Power supply unit (PSU) form factor | ATX |
| Cooling type | Active |
| Product color | Black |
| Number of fans | 1 fan(s) |
| Sustainability certificates | Low Voltage Directive (LVD), RoHS |
| Cables included | AC, DC |
Weight and Dimensions| Depth | 160 mm |
|---|---|
| Width | 150 mm |
| Height | 86 mm |
| Weight | 1620 g |
OVP shuts down PSU if DC outputs exceed set levels for compliance.
OCP ensures DC voltage rails remain within safe operating limits.
OTP shuts down PSU when internal temperature reaches a set point.
SCP ensures PSU shuts down if rails short to others or ground.
Technical specifications table for the RM1000x model.
Details the DC modular cables included with the RM1000x.
Instructions for removing an old power supply before installation.
Steps for installing the new RMx Series power supply unit.
Critical warnings about electric shock hazards and proper installation.
