To Next PageTo Next Page
Need help?Do you have a question about the Corsair TX650M and is the answer not in the manual?
General| Hold time | 16 ms |
|---|---|
| Total power | 650 W |
| Power factor | 0.99 |
| Input current | 10 A |
| AC input voltage | 100 - 240 V |
| AC input frequency | 47 - 63 Hz |
| Combined power (+12V) | 612 W |
| Combined power (-12V) | 9.6 W |
| Combined power (+3.3V) | 130 W |
| Combined power (+5Vsb) | 15 W |
| Max output current (+12V) | 51 A |
| Max output current (-12V) | 0.8 A |
| Power protection features | Over power, Over voltage, Overheating, Short circuit, Under voltage |
| Max output current (+3.3V) | 25 A |
| Max output current (+5Vsb) | 3 A |
| Power Factor Correction (PFC) type | Active |
| Purpose | PC |
| ATX version | 2.4 |
| EPS version | 2.92 |
| Noise level | - dB |
| Certification | FCC, ICES, CE, UL, cUL, RCM, TÜV, CB, CCC, BSMI, EAC, WEEE, KC |
| Bearing technology | Rifle |
| 80 PLUS certification | 80 PLUS Gold |
| Mean time between failures (MTBF) | 100000 h |
| Power supply unit (PSU) form factor | ATX |
| Fan speed | 1546 RPM |
| Fan diameter | 120 mm |
| Fan location | Top |
| On/off switch | Yes |
| Product color | Black |
| Number of fans | 1 fan(s) |
| Noise level (quiet mode, 50%) | 15.8 dB |
| Noise level (full-load mode, 100%) | 33.1 dB |
| Noise level (silent mode, \u003C30%) | 6 dB |
| Operating temperature (T-T) | 0 - 50 °C |
| Sustainability certificates | RoHS |
| Package type | Box |
| Cabling type | Semi-Modular |
| SATA power cable length | 500, 600 mm |
| Motherboard power connector | 20+4 pin ATX |
| Floppy drive power connector | 1 |
| Floppy disk drive cable length | 101 mm |
| Motherboard power cable length | 610 mm |
| PCI Express power cable length | 600 mm |
| Number of SATA power connectors | 8 |
| Peripheral (Molex) power cable length | 450, 550, 650, 750 mm |
| Peripheral (Molex) power connectors (4-pin) | 4 |
Weight and Dimensions| Depth | 160 mm |
|---|---|
| Width | 150 mm |
| Height | 86 mm |
| Weight | 1780 g |
Specifications for the TX850M power supply unit, including load and output details.
Protects against excessive DC output voltages, shutting down the PSU.
Ensures DC voltage rail outputs stay within safe operating limits.
Shuts down the PSU when internal temperature reaches a critical point.
Protects against low impedance shorts on output rails, preventing damage.
Instructions for safely disconnecting and removing an old power supply.
Steps for physically installing the new TXM Series power supply.
General warnings about electrical hazards and proper installation procedures.
List of regulatory agencies and their associated standards.
Describes Corsair's liability and exclusive remedies for warranty breaches.
Details conditions not covered by the warranty, such as wear and tear or misuse.
Policy for replacing products that are no longer manufactured.
Specifies limitations on consequential damages for product warranties.
Guidance on contacting support and processing warranty claims.
