C3+ IFU - 0723 01140 (70048) UK Page 6 of 18
3. Device description
The following section describes the features of the C3+, accessories and accompanying information.
3.1 Included components
The C3+ comes with the following included in the package:
● The Cortrium C3+ Holter Monitor
● A micro-USB cable for charging and data extraction
● Short manual with reference to Instruction for Use and Technical Documentation (this
document) also found on www.cortrium.com/manuals/
3.2 Accessories
The C3+ requires the following to function as intended:
● Three third-party ECG electrodes per patient use (not supplied with device)
● The software tools found on www.cortrium.com
3.3 Device layout and light
The C3+ has three connectors for ECG electrodes, a single button at the center as well as an LED
indicator. A USB port can be found on the back of the device.
The button is used to start recordings and to log patient events in the C3+’s internal memory as well
as connect the device via Bluetooth and turn the device off.
To Next Page
Loading...