5 6
4. Place Child in
Child Restraint to
Determine Proper
Harness Fit
The child’s bottom
and back should be
flat against the child restraint. See page
6 for fit guidelines.
How Does Your Child Fit?Prepare Child Restraint to Fit Your Child
1. Fully Loosen
Harness Strap
Push down on harness
release lever (under
flap on front of seat
pad) while pulling out
on harness strap as
shown.
3. Release Chest
Clip
Press on chest clip
release button and
pull apart. Place
harness strap out of
the way.
2. Unbuckle Harness
Press in towards the
top of the red button.
Pull buckle tongues
out.
To change harness strap position, see pages 7-8.
To prepare seat as a booster, see pages 12-16.
Use the guidelines below to determine if the harness strap is in the right place for
your child.
FORWARD FACING
with Internal Harness
Harness strap MUST be at or slightly above shoulders.
Always choose the shoulder harness slot that is closest
to your child’s shoulder height.
If the highest shoulder harness slots are below the
child’s shoulders, and the child weighs at least 40 lb
(18 kg), you must convert the child restraint to a booster
seat.
To Next Page
Loading...
