System maintenance
All service operations which are not specified in this user manual should be performed by qualified personnel in accordance with the service
handbook (to be required to the manufacturer).
All materials used in the construction of the MicroQuark are non toxic and pose no safety risk to the patient or operator.
Prior to the device cleaning, disinfection and inspection it is necessary to switch off the device and to disconnect adapters from the supply mains.
In order to guarantee the highest accuracy of measurements we recommend you to disinfect the turbine periodically.
Use disposable anti-bacterial filters or disinfect each part in contact with the patient before each test.
24 - System maintenance - System maintenance
To Next Page
Loading...