INSTALL GUIDE
The ranges must be used only with the legs properly installed. Four height-
adjustable legs are shipped with the range in the polystyrene container
situated over the appliance.
Before installing the legs, position the appliance
near its final location as the legs are not suitable for moving the appliance
over long distances. This next part requires 2 people. After unpacking the
range, tilt the range enough to insert the legs in the appropriate receptacles
situated on the lower part of the appliance. Lower the range gently to keep
any undue strain from legs and mounting hardware. If possible use a pallet or
lift jack instead of tilting the unit. Adjust leg height to the desired level by
twisting the inside portion of the leg assembly until the proper height is
reached. Check with a level that the cooktop is perfectly level.
INSTALLING THE LEGS
12
To Next Page
Loading...
Need help?
General
