Pendular Spreader PDV-PDHV models
6
Beside the standard spout, several pendulum items are available for different applications, such as
for the salt spreading where the spreading width is min. 2 m until max. 4 m, or for using in vineyards,
orchards or in parks.
Spreading spout Width adjustment key
The hopper in fiberglass reinforced plastic cannot rust nor be damaged.
The painting of the frame, as for all Cosmo products, is made by a water base varnish with
successive backing at 150° with the application of the primer bath, assuring a great protection and
long life of the machine.
The feeding of the disc is by gravity through the exits, located on the bottom of the hopper, that can
be opened or closed by a mechanical or hydraulic system (optional). The dosage of the fertilizer is
made by operating on the opening section by a dosing rod that slides on a threaded pin with a
graduate scale.
Standard agitator Crown agitator Opening lever
For the more powdered fertilizers it is possible to settle an agitator/mixer on the bottom of the
hopper to avoid the formation of lumps in the fertilizer.
For the PDV 500 and 600 models the 3-point hitch is only of category I, whereas for the other models
(PDHV 800, 1000, 1250) the hitch is of category I and II.
To Next Page
Loading...
Need help?
General
