The COSMO Pro Air Purifier is designed to filter large particles of dust, hair, PM2.5, formaldehyde, allergens, and remove odors, purifying airborne pollutants to protect health.
Function Description:
The air purifier operates by drawing in air, filtering it through a composite filter, and then releasing purified air. It includes a UVC Disinfection Module for killing bacteria and viruses. The device features a digital display and various control buttons for different functions.
Important Technical Specifications:
- Rated Voltage: 230V
- Rated Power: 60W
- CADR (Particulates): 600m³/h
- Noise: 20-50dB
- Application Area: 100㎡
- Material Quality: ABS
- Overall Size: 290290577mm
- Product Weight: 7.5KG
- Filter Type: Photocatalysis filter, Anti-bacteria cloth, Activated carbon, and Hepa 13 composite filter.
Usage Features:
- Placement: The purifier should be placed on a flat, stable surface, at least 50cm away from curtains, windows, furniture, or other obstacles to allow free air circulation.
- Initial Setup: Before first use, ensure the plastic bag around the filter inside the machine is removed.
- Power On/Off: Press the power button to turn the purifier on or off. Upon activation, the air quality detection sensor system initiates a 30-second test, after which the indoor air quality is displayed on the digital tube and indicated by a color-coded light (blue for good, green for excellent, red for poor).
- Air Quality Indicator:
- 0-75 Digital Display: Blue light, Good air quality.
- 76-150 Digital Display: Green light, Excellent air quality.
- 151 above Digital Display: Red light, Poor air quality.
- UVC Function: Press the UVC button to activate the built-in ultraviolet lamp, which kills bacteria and viruses in the filter and airflow. Press again to turn off.
- Anion Function: The anion function is off by default. Press the anion button to activate it; the appliance will then release anions. Press again to turn off.
- Timer/Child Lock: While the purifier is working, press the timer button to select a working time (1-8 hours). The purifier will automatically stop after the set time. Hold the button for 3 seconds to activate child lock.
- Wind Speed Adjustment: Press the wind speed button repeatedly to cycle through different modes: Low -> Medium -> Strong -> Auto -> Sleep.
- Auto Mode: The wind speed automatically adjusts based on the air quality detected by the sensor. This mode is recommended for general use.
- Sleep Mode: The wind speed is set to Low, and the appliance lights turn off automatically.
- WiFi Function: Press and hold the WiFi button for 3 seconds to connect to a WiFi network.
Maintenance Features:
- Cleaning: Always stop the appliance and unplug it before cleaning. Do not spray water directly on the appliance. Avoid using sulphuric acid, hydrochloric acid, or organic solvents (e.g., thinner, kerosene, acetone) to clean the exterior, as this may damage the product surface. Ensure water does not flow into the product.
- Filter Replacement: The composite filter (Photocatalysis filter, Anti-bacteria cloth, Activated carbon, and Hepa 13 composite filter) should be replaced approximately every 12 months, based on an average use of 8 hours per day at low speed. The filter replacement frequency may vary depending on usage duration and operating environment.
- Filter Reset Indicator: The air purifier is equipped with a filter replacement indicator. When the filter needs replacement, the indicator will start blinking red. After replacing the filter, hold the filter reset button for 5 seconds or longer to reset the filter life.
- Filter Handling: Air filters are not washable or reusable. Do not clean the filter with a vacuum. Avoid touching the pleated filter surface or smelling the filter, as it has collected pollutants.
- Storage: If the appliance will not be used for a long period, store it in a shaded and dry place.
Safety Precautions:
- Do not cover the air inlet or outlet.
- Do not touch the appliance with wet hands.
- Do not allow any liquid to enter the appliance.
- Do not use the appliance in a damp place or close to a heat source.
- Do not place anything on the appliance or insert foreign objects.
- Keep the appliance away from flammable articles or products (curtains, aerosols, organic solvents).
- Always use the appliance on a flat, stable surface; never in an inclined or horizontal position.
- Switch off and unplug the appliance during prolonged absence, before moving, or when assembling/cleaning.
- Ensure the power cord is in good condition and not damaged. If damaged, it must be replaced by the manufacturer or a specialist.
- Children should be supervised to ensure they do not play with the product and must not clean or maintain it without supervision.
- This product is designed for indoor use and not for industrial applications.
- Do not operate the product in dusty, humid, or hazardous locations.
- Always unplug the unit by gripping the plug, not the cord.
- Expand the power cord to the appropriate length before use.
Need help?
General
To Next Page