10
5-5. How to Fill the Sampling Container
The sample container has a
quantitative groove to accommodate
the waste grease sample, use the
spatula and fill this groove with a
sufficient amount of waste grease.
Use the edge of the spatula and
scrape off the excessive waste
grease to obtain a quantitative
volume of 0.8ml.
Then wipe off any excessive waste
grease that may adhere to sampling
container with tissue or a soft cloth,
and cover the collected waste
grease sample with the protective
cover.
Spatula
Grease
Attach the protective cover
Scrape off the excessive grease
To Next Page