This document is a user manual for the Costway Rolling Steam Cleaner, model EP24668. It provides detailed information on the product's assembly, operation, maintenance, and troubleshooting, along with important safety instructions and technical specifications.
Function Description:
The Costway Rolling Steam Cleaner is designed for indoor household cleaning using steam. It is not intended for commercial or industrial use. The device utilizes hot, penetrating steam to clean various surfaces, including hard floors, mirrors, windows, and other areas, and can also sanitize surfaces by killing germs and bacteria. The cleaner features a main unit with a boiler, a steam hose, and a main nozzle, to which various accessories can be attached for different cleaning tasks.
Important Technical Specifications:
- Model: EP24668
- Voltage: 120V
- Wattage: 1500W
- Amperage: 12.5A
- Water Capacity: 52 oz. (1,500 ml.)
- Heating Time: Approximately 8-10 minutes
- Continuous Steam Time: Approximately 45 minutes
- Net Weight: 10.1 lbs. (4.6 kg)
- Unit Dimensions: 15.7" x 11.1" x 13.1" (40 x 28.2 x 33.5 cm)
- Power Cord Length: 16.4' (500.0 cm)
Usage Features:
The steam cleaner offers versatile cleaning capabilities through its various components and accessories:
- Lighted On/Off Switch (1): Activates/deactivates the unit and indicates power status.
- Boiler & Safety Cap (2): Internal reservoir for water, accessed by removing the cap. Requires sufficient water for proper function.
- Back Cord Wrap (3): Stores the power cord and small accessories.
- Handle (4): Designed for user comfort and safety, stays cool during operation.
- Steam Lock Switch (5): Locks the steam button for continuous, hands-free steaming.
- Steam Button (6): Provides on-demand steam release from the Main Nozzle.
- Carry Handle (7): Convenient for carrying the unit.
- Main Nozzle (8): Emits a powerful flow of steam.
- Steam Hose (9): Channels steam from the Boiler to the Main Nozzle.
- Steam Jet Nozzle (10): Focuses steam and serves as an attachment point for utility brushes and scrub pad.
- Extension Wands (11): Connect to the Main Nozzle for floor mopping and reaching high/difficult places.
- Mop Head (12): Connects to Extension Wands for steam cleaning hard floor surfaces.
- Microfiber Pads (13): Attach to the Mop Head for removing scuffs and stains from hard floors. They are reusable and machine washable.
- Water Funnel (14) & Measuring Cup (15): Aid in filling the Boiler with the optimal amount of water (17-52 oz. / 500-1,500ml).
- Squeegee (16): Connects to Main Nozzle or Extension Wands for cleaning mirrors, windows, and smooth glass surfaces.
- Triangle Brush (17): Connects to Main Nozzle or Extension Wands for cleaning corners and difficult angles.
- Nylon Utility Brushes (18): Connect to Steam Jet Nozzle for scrubbing tough dirt and stains.
- Brass Utility Brush (19): Connects to Steam Jet Nozzle for removing tough stuck-on grease and grime from durable surfaces like ovens and grills. (Caution: May scratch delicate surfaces; test in an inconspicuous area first).
- Scrub Pad (20): Connects to Steam Jet Nozzle for scrubbing tough dirt and scuffs.
- Carpet Glider (21): Used with the Mop Head for carpet cleaning.
General Operation:
- Place the cleaner on a flat, level surface.
- Ensure the On/Off Switch is "OFF" and the power cord is unplugged.
- Cautiously remove the Boiler cap and drain any remaining water.
- Fill the Measuring Cup with water (distilled or de-mineralized water is highly recommended to minimize mineral build-up).
- Use the Water Funnel to pour water into the Boiler, up to a maximum of 52 oz. (1,500 ml.).
- Replace the Boiler cap tightly.
- Plug in the power cord and switch the Lighted On/Off Switch to "ON."
- Allow 8-10 minutes for the water to heat.
- Direct the nozzle (with accessories) towards the desired surface and press the Steam Button. For sanitization, hold the nozzle approximately 1/2 inch from the surface for at least 5 seconds.
- The Steam Lock Switch can be used for continuous steam flow.
- Use a back-and-forth motion for cleaning and wipe steamed areas with a clean cloth while still wet (use caution on hot surfaces).
- After use, set the switch to "OFF" and unplug the unit.
Steam Mopping:
- Sweep or vacuum hard floors before mopping.
- Connect Extension Wands and Mop Head.
- Attach a Microfiber Pad to the Mop Head.
- Use a steady back-and-forth motion, working backward to avoid walking on freshly mopped areas.
- For effective bacteria killing, repeatedly mop a small area (approx. 3' x 3') for at least 2 minutes.
- Allow floors to air-dry; a fan can facilitate drying.
- Important: Do not use on unsealed hardwood or unglazed ceramic surfaces as this may cause warping or damage. Prolonged exposure to steam in one spot on sealed hardwood floors can also cause damage. Steam may remove wax sheen.
Maintenance Features:
- Mineral Build-Up Prevention: To minimize mineral build-up and prolong the life of the cleaner, use distilled or de-mineralized water.
- Monthly Cleaning Procedure for Mineral Build-Up:
- Turn off and unplug the unit.
- Allow the unit to cool for at least 30 minutes.
- Press and hold the Steam Button to release remaining steam pressure.
- Remove all accessories.
- Remove the Boiler cap and drain water.
- Fill the Measuring Cup with 17 oz. (500 ml.) of distilled vinegar.
- Carefully pour vinegar into the Boiler and gently shake the unit.
- Allow to stand for at least 40 minutes.
- Drain the vinegar.
- Rinse the Boiler with fresh water, drain, and repeat until the vinegar odor dissipates.
- Loosely replace the Boiler cap.
- Replace the boiler safety cap.
- Microfiber Pad Care: Machine washable. Wash separately from other fabrics, use liquid detergent, avoid fabric softeners or bleach. Air drying or low-heat machine drying is acceptable.
Safety Instructions:
- Read all instructions before use.
- Ensure electrical information matches power supply.
- Do not operate other high-wattage appliances on the same circuit.
- Do not immerse the unit in water or other liquids.
- Do not use the power cord as a handle, let it hang over edges, or be crimped.
- Pull the plug, not the cord, to disconnect.
- Do not operate with a damaged power cord or if the unit has been dropped/damaged. Contact a service center for repairs.
- Discontinue use if the plug overheats or distorts due to a loose outlet.
- Do not leave unattended while plugged in.
- Do not use where aerosol-based products or oxygen are being administered.
- Use only recommended accessories.
- If the On/Off switch does not illuminate, disconnect power and refer to troubleshooting.
- Always turn off and unplug before filling the boiler.
- Only use water in the boiler; other cleaning agents can cause damage or injury. Do not exceed 1500ml.
- Do not use cleaners or chemicals in the water tank.
- Keep the power cord away from hot surfaces.
- Do not touch the nozzle during operation to avoid scalds.
- Pay attention to steam spray to avoid burns or injury.
- Children or unfamiliar persons should not operate the appliance.
- Store indoors, away from rain or wind.
- Do not attempt to repair or dismantle; send to a service center.
- Unplug after use and before cleaning/maintenance.
- Do not direct liquid or steam towards electrical components.
- Hot Steam Warning: Allow unit to cool for 5-10 minutes and press the steam button to release pressure before removing the boiler cap to refill.
- Check the appliance before each use; do not operate if the nozzle is blocked.
- Avoid touching hot metal parts, hot water, or steam. Do not touch the nozzle or attach accessories while in use.
- Be careful when using on uneven surfaces.
- Consult manufacturer guidelines for surfaces being steamed; test on an inconspicuous area first.
- Do not leave the unit resting in one spot on any surface during steam mopping.
- Do not allow the power cord to touch hot surfaces.
- Always allow the steam cleaner to cool (at least 30 minutes) and empty the boiler before storing. Do not store with a damp microfiber pad attached.
- Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.
- This appliance is not intended for use by children or persons with reduced physical, sensory, or mental capabilities unless supervised and instructed. Children should not play with the appliance or perform cleaning/maintenance without supervision.
- Attention: When replacing accessories, ensure the machine is off, no steam is extruding, and the machine has cooled for 30 minutes to prevent burns.
General
To Next Page
