13
熟悉本机
Know the Radio
功能介绍
Power On/O
Press and hold [Power] key to power on the radio. Repeat the step to
power o the radio.
Check Channel and
Battery Level status
In standby mode, briey press the power button to check Channel and
battery Level status.
Volume Control
Press [+] to increase the volume. Press [-] to decrease the volume.
Note: When press [+] again under the maximum radio volume, the
speaker of radio will prompt an error sound. When the volume is
adjusted to the minimum by pressing [-] key, the radio is muted.
Transmitting/Receiving
1. To talk, press and hold the [PTT] button. When transmitting, the red
LED indicator is on. Release the PTT button when you are nished
talking. Do not use the radios closer than ve feet apart.
2. When receiving, green LED indicator is on.
fully charged. Do not expose the battery pack near the re or to the
sun, otherwise there are safety risks.
·
During charging, it is not recommended to transmit the radio.
·
The battery pack may slightly heat up during charging, which is a
normal phenomenon.
Know the Radio
To Next Page
Loading...