COTRE CO04D - Menu Selection; Channel Selection

14
功能介绍
Precautions for Radio Operation
·
When the radio is transmitting, keep the radio in a vertical position,
and keep the microphone 2.5-5 cm away from the mouth. When transmitting,
the radio should be at least 2.5 cm away from the head or body.
·
Do not turn on/o󰀨 the radio repeatedly during use, and adjust the
volume to a level suitable for your hearing.
·
Before using the radio for communication, please set the transmitter
and receiver to the same frequency point.
·
For the analog channel that requires intercom, please set the
transmitter and receiver to the same sub-audio frequency.
·
For digital channel.
1. If encryption is enabled for the digital channel that requires intercom,
please set the transmitter and receiver to the same password.
2. For the digital channel that requires intercom, please set the
transmitter and receiver to the same color code.
Menu Selection
1. The [Menu] key were set to (i) Switch channel, (ii)Turn on/o󰀨
scanning , and (iii) Set high/low power.
2. If the radio is not operated for 3 seconds or [PTT] key is pressed, it
will exit the menu mode.
Channel Selection
In the standby state, press the [Menu] key once to enter the channel
selection menu, and then press the [+] or [-] key to select the channel.
The current channel number will be voice prompted every time you
select. If the radio is not operated for 3 seconds or [PTT] key is
pressed, it will exit the menu mode.
Features
功能介绍
Features