*Show flashing LED during game play indicates low battery, recommend replacing batteries.
Pairing mode:
If Game Console & Control Deck cannot be paired, please hold Player 1 & 2 buttons at
the same time then turn ON the power switch of Control Deck. Once connected
successfully, indicator light will light up SOLID RED.
Sleep mode:
Control Deck goes to sleep mode after 10 minutes of inactivity. (press any button to wake up
Control Deck or turn OFF the power switch to conserve batteries for future play).
Assistance or service:
If you have questions regarding your Arcade1Up product or require technical support,
contact Arcade1Up Customer Service at www.Arcade1Up.com and click on "Support".
Caution: Servicing instructions are for use by qualified service personnel only. To reduce
the risk of electric shock, do not perform any servicing other than that contained in the
operating instructions unless you are qualified to do so.
To Next Page
Loading...