CountyLine CLW750-01 User Manual (English)

Questions and Answers:

G
Gerald TorresAug 5, 2025
What to do if my CountyLine CLW750-01 Power Pump fails to operate?
- T
  Thomas LittleAug 5, 2025
  If your CountyLine Power Pump isn't working, there are several things you can check. First, make sure the power cord is securely plugged into the outlet and that the outlet has power. Disconnect power to the outlet before handling the pump or motor. Also, ensure the liquid level is high enough to activate the switch or controller. Check that the 3/16” (4.7 mm) vent hole in the discharge pipe isn't blocked. Look for any blockages in the pump inlet, impeller, check valve, or discharge pipe. If the thermal overload has tripped, test start the pump; if it starts and stops, disconnect it from the power source for 30 minutes to allow the motor to cool, then reconnect. Finally, check the float switch operation for maximum possible clearance.
R
Rachel JonesAug 15, 2025
Why CountyLine CLW750-01 fails to empty sump?
- D
  donaldcardenasAug 15, 2025
  If your CountyLine Power Pump isn't emptying the sump, ensure all valves in the discharge line are fully open. Clean out the discharge pipe and check valve. Inspect the pump inlet and impeller for any blockages. If the pump isn't sized properly, a higher capacity pump may be required. Also, check the float switch operation for maximum possible clearance.
S
Scott GomezAug 25, 2025
How to fix a CountyLine CLW750-01 Power Pump that will not shut off?
- B
  brittanyhodgesAug 25, 2025
  If your CountyLine Power Pump won't shut off, check the switch or controller automatic floats for proper operation, location, and clearance.

CountyLine CLW750-01 Specifications

General

Model	CLW750-01
Category	Power Pump
Brand	CountyLine
Maximum Head	150 feet
Voltage	115V
Power Source	Electric
Material	Cast Iron
Cord Length	10 ft
Discharge Size	1-1/4 in.
Inlet/Outlet Size	1-1/4 in