●
OFF Position – The camera will remain OFF as long as the switch is in this
position.
●
AIM Position
– While in the AIM position, you will be able to view the main
screen, and change your cameras settings.
●
ON Position
– The camera will be ON and functioning in the settings that
you have selected.
•
When going from either the OFF or AIM position to ON, there will be a
10 second countdown followed by a blank screen, it is supposed to do this.
●
Arrow Keys
– Use either of the arrow keys to change the setting for your
camera.
●
OK Button
– Click OK to access the menu and click again to move through
each setting.
On the main screen you will see your time setting and camera mode. Please
read through the following camera settings for more information.
Customizing the Camera Settings
The camera has a very basic settings set up screen that will allow you to
customize the camera to your needs.
•
Screen 1: Time
Click OK then using the arrow keys set the hour. Click OK again and set the
minutes. Once you have set the camera to the current time click OK and you
will move to the next screen.
To Next Page
Loading...
