Covidien Nellcor OxiMax N-600x User Manual

Operator’s Manual
Nellcor
OxiMax N-600x
Pulse Oximeter
TM
OxiMax
TM
Technology

Covidien Nellcor OxiMax N-600x Specifications

General

Type	Pulse Oximeter
Display Type	LCD
SpO2 Measurement Range	0% to 100%
Pulse Rate Range	20 to 250 bpm
Perfusion Index Range	0.02% to 20%
Plethysmograph	Yes
Supported Sensors	Nellcor OxiMax sensors
Accuracy	±2% at 70% to 100% SpO2
Connectivity	RS-232
Power Source	AC or Battery
Alarms	Audible and Visual
Battery Life	Approximately 12 hours

Summary

Safety Information

Safety Warnings

Alerts users to potential serious outcomes like death, injury, or adverse events.

Safety Cautions

Advises users to exercise care for safe and effective use of the pulse oximeter.

Introduction

Intended Use

Specifies the indication for use of the N-600x Pulse Oximetry System.

How to Use this Manual

Provides guidance on how to navigate and utilize the operator's manual.

Symbols, Controls, Displays and Indicators

About the Front Panel

Details the buttons and symbols located on the front panel of the monitor.

About the Rear Panel

Identifies and describes the components found on the rear panel of the monitor.

About the Symbols

Explains the various symbols displayed on the monitor.

About the Controls

Describes the function of each control button on the monitor.

About the Displays

Details the different display modes and indicators on the monitor.

About the Visual Indicators

Explains the meaning and function of the monitor's visual indicators.

About the Audible Indicators

Describes the various audible alerts and tones generated by the monitor.

Setting Up the Monitor

List of Components

Details the items included with the N-600x pulse oximeter.

Connecting to an AC Power Source

Provides instructions for connecting the monitor to AC power.

Connecting an OXIMAX Sensor

Guides users on how to connect the OXIMAX sensor to the monitor.

Operating the Battery

Operating on Battery Power

Explains how to operate the monitor using its internal battery.

Low Battery Indicator

Describes the indicator and alarm for low battery conditions.

Description of Low and Critical Battery Conditions

Details the states and operations for low and critical battery levels.

Battery Fuel Gauge Indicator

Explains the battery fuel gauge and its capacity levels.

Using the Monitor

Menu Description

Outlines the menu structure and navigation for the N-600x.

Menu Structure

Illustrates the hierarchy and flow of the monitor's menu system.

Parameter Ranges

Lists the available parameters, their ranges, and factory default settings.

Turning On the Monitor

Provides the procedure for powering on and verifying the monitor's functionality.

Selecting the Pleth View

Explains how to display the pleth waveform, SpO2, and pulse rate.

Selecting the Blip View

Guides users on how to display SpO2, pulse rate, and blip bar.

Selecting the Real-Time Trend View

Details how to select and configure the real-time trend data display.

Setting the Pulse Beep Volume

Describes how to adjust the volume of the pulse beep.

Setting the Alarm Volume

Explains how to adjust the volume of the monitor's alarm tones.

Setting the Date and Time

Provides instructions for setting the monitor's date and time.

Setting Alarm Limits

Guides users on adjusting SpO2, pulse rate, and SatSeconds alarm limits.

Setting SatSeconds Alarm Limit

Explains how to set the SatSeconds alarm limit for managing alarms.

Setting Monitor Response Mode

Describes how to configure the monitor's response time for SpO2 calculation.

Selecting the Display Language

Details how to change the monitor's display language.

OXIMAX Sensor Messages

Explains sensor adjust condition and adjust messages.

Using Monitor Trend Data

Storing Trend Data

Explains how the monitor stores SpO2 and pulse rate readings.

Selecting the Trend Data Display Scale

Guides users on adjusting the amount of trend data shown on screen.

Reading the Trend Data Display

Identifies and explains the components of the trend data display.

Dual Trend Data Display

Describes how to view both SpO2 and pulse rate trend data.

SpO2 Trend Display

Explains how to display SpO2 trend data.

Pulse Rate Trend Display

Guides users on how to display pulse rate trend data.

Histogram Trend Data Display

Explains the display of trend data for SpO2 and pulse rate percentages.

Clearing Trend Information

Provides instructions on how to delete stored trend data.

Using OXIMAX Sensor Event Records

Setting up OXIMAX Sensor Messages

Guides on enabling or disabling OXIMAX sensor messages.

Setting In-Sensor Data Type

Explains how to adjust the patient alarm event data recording type.

OXIMAX Sensor Event Record Data Available

Indicates when OXIMAX sensor contains patient event data.

OXIMAX Sensor Event Record Graphical Data

Describes graphical representations of patient event history.

Viewing and Printing OXIMAX Sensor Event History Data

Provides steps to view and print sensor event history data.

OXIMAX Sensor Tabular Event Data

Lists all events recorded on the OXIMAX sensor's memory chip.

Printing Monitor Trend Data

Printing

Instructions for sending trend data to a personal computer or serial printer.

Monitor Trend Data in ASCII Mode

Explains the format and procedure for printing trend data in ASCII mode.

Trend Data in Graph Mode

Details the procedure and format for printing trend data in graph mode.

Real-Time Display/Printout Format

Describes the format of real-time data transmitted to a printer or PC.

Using the Data Port

Connecting to the Data Port

Guides on connecting the monitor's data port to a serial printer or PC.

Data Port Pinouts

Lists the pinouts for the monitor's data port.

Data Port Setup

Explains how to set the baud rate and protocol for the data port.

Using the Nurse Call Interface

Describes how the nurse call feature integrates with the institution's system.

Calculating the Analog Voltage Output

Explains how to use analog voltage outputs for calibration.

OXIMAX Sensors and Accessories

Selecting an OXIMAX Sensor

Provides guidance and warnings for selecting the appropriate OXIMAX sensor.

OXIMAX Sensor Features

Details features of OXIMAX sensors based on revision level and type.

Optional Accessories

Lists available mounting configurations, carrying case, and utility basket.

Performance Considerations

Dysfunctional Hemoglobins

Explains how dysfunctional hemoglobins affect SpO2 readings.

Anemia

Discusses how anemia can affect arterial oxygen content and SpO2 readings.

OXIMAX Sensor Performance Considerations

Details factors affecting OXIMAX sensor performance and accuracy.

Troubleshooting

On-Screen Help

Describes the monitor's on-screen help system for problem solving.

Accessing Multiple Topics

Guides on accessing and navigating through multiple help topics.

Error Codes

Lists and explains error codes, their possible causes, and actions.

Prompts and Error Messages

Details the N-600x prompt/error messages, timing, and resolution.

Primary Speaker Failure

Describes how to identify and handle a primary speaker failure.

Help and Support

Provides contact information for technical assistance and service.

EMI (Electromagnetic Interference)

Discusses electromagnetic interference and compliance for medical devices.

Maintenance

Service

Details service requirements, calibration, and battery replacement.

Periodic Safety Checks

Recommends periodic inspections for mechanical damage and label legibility.

Cleaning

Provides instructions for cleaning and disinfecting the monitor and sensors.

Using SatSeconds

Overview

Explains the SatSeconds alarm management technique for SpO2 monitoring.

SatSeconds Display

Describes the SatSeconds indicator and its behavior when SpO2 is outside limits.

Factory Default Settings

Neonate Default Settings

Lists the factory default settings for neonatal monitoring.

Adult Default Settings

Lists the factory default settings for adult and pediatric monitoring.

Principles of Operation

Overview

Explains how the N-600x uses pulse oximetry to measure oxygen saturation.

Automatic Calibration

Describes how the monitor automatically calibrates for SpO2 measurement.

OXIMAX Technology

Details the OXIMAX technology integrated into sensors and the N-600x.

Specifications

Performance

Details measurement ranges and accuracy specifications for the N-600x.

Electrical

Specifies power requirements, fuses, and battery details for the instrument.

Environmental Conditions

Outlines operating, transport, and storage environmental parameters.

Physical Characteristics

Provides weight and dimensions for the N-600x pulse oximeter.

Compliance

Lists the safety standards and regulations the device complies with.

Electromagnetic Emissions

Details electromagnetic emissions and compliance guidance.

Electromagnetic Immunity

Outlines electromagnetic immunity tests and compliance levels.

Clinical Study

Overview

Introduces the clinical study conducted for Nellcor sensors and the N-600X.

Methods

Describes the study design, volunteers, and data collection procedures.

Study Population

Presents demographic data of the study participants.

Study Results

Shows the calculated SpO2 accuracy for Nellcor sensors versus CO-oximeters.

Adverse Events or Deviations

Reports on any adverse events or deviations from the study protocol.

Conclusion

Summarizes the study findings regarding sensor accuracy acceptance criteria.