To Next PageTo Next PageWhat to do if Covidien Kendall SCD 700 Medical Equipment shows 'Service Required'?
If your Covidien Medical Equipment displays 'Service Required' due to a failed internal component, the issue cannot be resolved by the user.
How to fix 'Manual Reset Required' error on Covidien Medical Equipment?
If your Covidien Medical Equipment requires a manual reset, power the device off and on. If the error persists, the controller requires service.
How to reset 'User Resettable' error on Covidien Kendall SCD 700?
To reset a 'User Resettable' error on Covidien Medical Equipment, press the A and B button(s) corresponding with the affected port without powering the unit down.
How to solve 'Garment Mismatch' error on Covidien Kendall SCD 700 Medical Equipment?
To address a 'Garment Mismatch' error on Covidien Medical Equipment, try pressing the corresponding A and B Button(s).
General| Category | Medical Equipment |
|---|---|
| Portability | Portable |
| Model | SCD 700 Series |
| Manufacturer | Covidien (now part of Medtronic) |
| Purpose | Deep Vein Thrombosis (DVT) prevention |
| Function | Sequential compression therapy |
| Compression Type | Sequential, gradient |
| Cycle Time | 11-second inflation, 60-second cycle |
| Sleeve Options | Calf, Thigh, Foot |
| Display | LCD |
Key safety advice and alerts for operating the medical device.
Defines various symbols used on the device and in documentation.
Initial device setup, power-on sequence, and garment connection confirmation.
System function during use and the therapy customization feature.
Steps for safely turning off the compression system.
Identifying and resolving system errors with specific codes and remedies.
