Covidien Newport HT70 User Manual

Operator's Manual
Newport
HT70 Ventilator with Accessories
Plus Model
TM

Covidien Newport HT70 Specifications

General

Brand	Covidien
Model	Newport HT70
Category	Medical Equipment
Language	English

Summary

1 Introduction

1.3 Intended Use

1.5 Warnings, Cautions, and Notes

Crucial safety information and operational guidelines for using the ventilator.

1.5.1 General Warnings

Essential warnings to prevent patient injury and ensure safe operation.

1.5.2 General Cautions

Important cautions to prevent equipment damage and ensure proper use.

3 Setup and Pre-Use Preparations

3.3 Connecting to AC Power

Steps for connecting the ventilator to an AC power source for operation.

3.4 Using the Power Switch

Procedures for turning the ventilator on and off using the power switch.

3.5 Making Parameter Changes

Guide on how to adjust ventilation and alarm parameters using the touch screen.

3.6 Attaching a Patient Circuit

Detailed steps for connecting patient breathing circuits to the ventilator.

3.6.3 Using the On-Airway Flow Sensor

3.7 Connecting Optional Accessories

4 Navigating the Screens

4.3 Ventilator Settings Adjustment

How to adjust ventilation and alarm parameters using the touch screen interface.

4.4 Startup Screen Navigation

Navigating the startup screen for initial setup and checks before ventilation.

4.4.1 Circuit Check Procedure

Procedure for performing the critical circuit integrity check before patient use.

4.5 Alarms Screen Navigation

Guide to accessing and managing ventilator alarms and their settings.

4.5.1 Settable Alarms

Explanation of adjustable alarm parameters and their configuration.

4.6 Main Screen Navigation

4.8.5 Calibrate O2 Mon Screen

5 Operating the Ventilator

5.1 Quick Check Procedure

Step-by-step guide for verifying proper ventilator function before use.

5.1.2 Pre-Test Inspection

5.1.3 Setup

Procedures for setting up the ventilator for testing.

5.1.4 Standard Test Settings

5.2 Patient Set-Up Procedure

Comprehensive guide for preparing the ventilator for patient use.

5.3 Troubleshooting Guide

Solutions for common problems encountered during ventilator operation.

6 Ventilator Alarms

6.1 Setting Alarms

How to adjust and configure various alarm parameters for patient safety.

6.1.1 Alarm Quickset

6.2.1 Audio Paused/Reset Button

6.3 User-Adjustable Alarms

Detailed description of alarms that can be manually adjusted by the user.

6.3.1 Low Pressure Alarm

Alarm triggered by low pressure in the breathing circuit.

6.3.2 High Pressure Alarm

Alarm triggered by excessive pressure in the breathing circuit.

6.3.3 Low Inspiratory Minute Volume Alarm

Alarm for insufficient delivered minute volume.

6.3.4 Low Expiratory Minute Volume Alarm

Alarm for insufficient exhaled minute volume.

6.3.10 High Tidal Volume Alarm

Alarm for excessively high tidal volume.

6.3.11 Apnea Alarm

Alarm indicating a lack of patient breathing effort.

6.4 Backup Ventilation

Explanation of the backup ventilation feature and its activation.

6.5 Automatic Alarms

Alarms that are automatically set by the ventilator based on patient or device conditions.

6.5.1 High Baseline Pressure Alarm

6.5.2 Low Baseline Pressure Alarm

6.5.8 No External Power Alarm

Alarm indicating disconnection from external power.

6.5.9 Device Alert Alarm—System Error

Alarm for critical system errors requiring immediate attention.

6.6 Battery Alarms

Alarms related to the status and performance of the internal batteries.

6.6.1 Power Pac Battery Pack Low Alarm

Notification of low charge on the Power Pac battery.

6.6.6 Backup Battery Shutdown Imminent Alarm

Warning of imminent shutdown due to backup battery depletion.

7 Battery Operation

7.1 Internal Dual Battery System

Detailed explanation of the ventilator's dual battery system.

7.1.1 Power Pac Battery Pack

7.3 Check Battery Charge Level/Battery Time Estimator

How to check battery status and estimate remaining runtime.

7.5 Battery System Maintenance

7.7 Battery Alarms Overview

8 Cleaning and Maintenance

8.1 Cleaning and Disinfecting

Procedures for cleaning and disinfecting the ventilator and accessories.

8.2 Ventilator

Specific instructions for cleaning the ventilator unit exterior.

8.3 Accessories

8.4 Reusable Breathing Circuits and Exhalation Valves

Procedures for cleaning reusable breathing circuits and valves.

8.5 Air Intake Filter

8.7 Maintenance Guidelines

General guidelines for routine and scheduled maintenance.

8.7.1 Routine Maintenance

8.8 General Warnings

Overarching safety warnings applicable to maintenance and service.

8.9 Factory Maintenance or Repair

Information regarding authorized service and repair procedures.