Tips
PREPARATIONS
- Make sure to remove each lter’s plastic packing before installing lters.
- The product is for household use. Use the product indoors only.
- When the product is not in use, remove the power plug from the electric outlet.
- When installing lters, check that the front side of lters is in the correct direction.
▶ Order of lters : Pre-lter → MCC
TM
Medium Filter → Deodorization lter
→ HEPA lter
The product is for 220 V – 240 V~ 50 Hz/60 Hz only.
Make sure to connect the power plug to a grounded
electric outlet (220 V – 240 V~ 50 Hz/60 Hz) dedicated to the product.
1. Open the front cover.
Open the front cover by pulling the
upper part of it.
2. Take out lters and remove
the plastic packing.
Remove the plastic packing of the lters
except the pre-lter and then install
lters according to the order of lters.
▶
▶
▶
How to install lter
Please Check Before Use!
To Next Page
Loading...
Need help?
General
