HOW TO USE
Press the power button and then select
the auto mode button.
■ To operate the manual mode
■ To select the auto mode
Press the power button and then select
the speed of the wind by pressing the
speed button.
Auto operating mode sets the wind speeds (step 1, 2, or 3) depending on the air pollution states
that are detected by the pollution sensor.
When the pollution levels stay in step 1 for approximately 10 minutes, the product switches to power
saving mode.
In the power saving mode, the fan is turned o to minimize the power consumption and all displays
except the power and auto indicators are turned o.
When the pollution level increases to level 2 or higher, the power saving mode is turned o.
When the power saving mode continues for 30 minutes, the product temporarily switches from the power
saving mode to step 1 to blend the surrounding air.
▶ Auto mode
Pollution level 1 Pollution level 2 Pollution level 3 or higher Power saving mode
SPEED Step 1 Step 2 Step 3 Fan o
▶
▶
Tips
- Before operating the product, connect the power plug to a dedicated electric outlet.
- Once the power is turned on, you will see the previously used operation mode,
already set for you to use.
To Next Page
Loading...
Need help?
General
