4
3
SAFETY INFORMATION | Danger
For Information
• Do not install the product in areas where moisture, dust or water
(rainwater) is present.
• Do not use the product in areas where ammable gases or
combustible materials are used or stored.
• Do not stick sharp objects such as a screw driver into the
pollution sensor unit.
• If the air purier produces a strange noise, burning smell, or
smoke, immediately remove the power plug from the electric
outlet and call our service center.
• Never put the product in water.
• Do not spray any ammable materials such as insecticides or
fragrances to the air inlet.
• Do not disassemble, repair, or modify the product.
• Do not place on top of the product any containers with water,
medicine, food, any metallic objects, or any ammable material.
• Unplug the product before you clean it.
• Do not clean the product by applying water directly to the
product or using benzene or thinner.
Precautions related to synthetic leather decoration
1. Touching the surface with a hot object or placing a hot object near the surface may cause deformations or
discoloration.
2. When the surface is contaminated, clean it with a soft cloth to remove the pollution source. If the pollution source
is not removed, dilute a neutral detergent with no additional function (such as bleaching, sterilization, anti-bacteria)
with enough water and clean the polluted source with a damp cloth and then remove the detergent completely.
3. Do not clean the surface with an organic solvent (alcohol, thinner, acetone, etc.) and do not expose the surface
to an organic solvent. This may damage the surface.
4. Since sharp objects may damage the surface, take care when handling such objects.
5. Do not store the product in a humid, cold or hot location for long periods.
6. You must avoid cleaning the synthetic leather by dipping it into liquid (water or neutral detergent solution).
7. Take care to not pollute the surface with a highly polluted substance such as a ball-point pen or marker.
8. If exposed to humidity for a long time, it may deform the surface.
To Next Page
Loading...
Need help?
General
