11
CLEANING METHOD
Cleaning the pre-lter (every 2 ~ 4 weeks)
1. Open the front cover by pulling out the
top part of it.
2. Press down on the top clip of the pre-lter and pull it out.
- To prevent dust from falling off, remove the lter carefully
without exerting a shock.
3. Clean the pre-ler with a vacuum cleaner or with water
depending on the level of contamination.
4. Install the pre-lter after removing the moisture completely. Fit the
front cover back to the product.
- When retting the pre-lter to the product, t it in the hook
correctly.
- Always unplug the product before cleaning the lter.
- The pre-lter is reusable by removing dust or cleaning it with water.
- If the pre-lter is not cleaned for a long time, the product performance may deteriorate.
- Odor lter and HEPA lter cannot be cleaned and reused. Never clean them with water.
Tips
To Next Page
Loading...
Need help?
General
