3
SAFETY PRECAUTIONS
WARNING : Failing to follow the precautions below may result in considerable
physical injury or property damage.
• The appliance is not to be used by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction.
• Do not insert ngers or foreign objects into the air inlet or outlet.
• Do not let children hang on to the product or climb on it.
• When removing the front cover, exercise caution that a part of your body or any kind of object
does not become stuck in the top part of the product.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to t in a polarized outlet only one way. If the plug does not
t fully in the outlet, reverse the plug. If it still does not t, contact a qualied electrician. Do not
attempt to defeat this safety feature.
• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized
service facility for examination and/or repair.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar
coverings. Arrange cord away from trafc area and where it will not be tripped over.
CAUTION : Failing to follow the precautions below may result in slight physical injury
or property damage.
• Do not install the product on a sloped surface.
• Do not apply force or impact to the product.
• When the product is in use, maintain a distance of at least 20 cm from the walls or adjacent
objects and 30 to 60 cm above the product.
• Install the product so that no obstacles block the circulation of air around the product.
• Install the air purier away from strong articial lighting or direct sunlight.
• Install the air purier at least 2 m away from electronic appliances such as a TV.
• Do not install the air purier in a location exposed to direct sunlight.
• Replace the lters according to the lter replacement cycles.
• Clean the Pre-lter with water regularly and dry it completely before use.
• Suitable for use with solid-state speed controls.
• Cleaning and user-maintenance, such as lubrication, may result in re, electric shock, or injury
to persons.
• Unplug or disconnect the appliance from the power supply before servicing.
READ AND SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
