INSTALLATION PRECAUTIONS
The summary for the proper installation of the water ltration device
1. Close main water supply valve to separate the faucet.
2. Wind the teon tape on the adaptor and t it to the
pipe.
3. Connect the faucet with the adaptor.
4. Connect 1/4 inch orange tubing with the connector
on the adaptor.
5. Open the feed valve to supply water to the ltration
system.
Do not turn the water pipe.
Shall install the adaptor with connector on the cold water
pipe.
Flush water through each lter at least 5 minutes before
Connection.
WATER FILTRATION PROCESS / INSTALLATION PRECAUTIONS
For Information
12
To Next Page
Loading...
