Coway CHP-03AR - Troubleshooting

FILTER REPLACEMENT METHOD
Maintenance
3. After separating the tting connected to the lter trying to replace, please
replace the lter. (Separate the tting using the proper tool.)
4. After connecting all the separated cables, t a groove in the front cover and
close with pressing it down.
Bychangingthelterandconnectingthettingandthehoseprecisely,checkthat
thereisnoleakageanddraintherstlteredwaternecessarily.
Tips
Pleasebesuretousethenewlteraftercleansing.
- Neo-senselter:PleaseassembleaftercleansingwithNeo-senselterforabout
30seconds.
- Postcarbon/Fine/Inno-sense/Membranelter(RO):
PleaseassembleaftercleansingwiththemainwaterpassedNeo-senselterfor
about3minutes.
Tips
26
WQA Approved NSF/ANSI 42/53/58 MH 04/27/2010