Coway CHP-04AR - INSTALLATION CAUTIONS; Installation Location Guidelines; Plumbing and Handling Cautions

20
Maintenance
Be cautious!
 Water ltration device installation place 1
Pleaseinstallthewaterltrationsystemnotataroughplace,adamp
place,aplacewheretheunitisexposedtothedirectsunlight,a
placewheredustispresent,oraplacethatthewaterdrops.
 Water ltration device installation place 2
Pleaseinstallattheplacewhereitis10cmormoreofromthewall
andthebottomisatandrm.
 After installing the water ltration system
Pleaseemptythewatertanklledwithlteredwatertwotimesafter
theproductinstallation.
 Cold water plumbing
Pleaseconnectthesourcewater.Makesurethatthesourcewateris
notfromhotwaterline.Ifyouusehotwaterassourcewater,then
itwillcausepermanentdamagestoROmembraneandseverely
degradetheproductperformance.
 Movement and installation
Whenthepositionismoved,connectthepowercordwhen30
minutespassesafterinstalling.
INSTALLATION
Tomaintainoptimalproductperformance,consultaCowayengineerforthedetailed
installationmethods.
Theremaybesomewaterremaininginsideofthelterwhichwasusedtotestthe
productduringinspectionprocessatthefactory.
Pleasefeelateasyanduseasitisn’ttheusedproduct.
Don’treusethemainwatersupplyvalveandhosethatwaspreviouslyusedwhenyou
re-installtheproduct.
Tips
Hot
W a ter