FILTER REPLACEMENT METHOD
1. Close the main water supply valve after unplugging the power cord, and
drain the water inside of the water ltration device (See P.18).
22
21
FILTER REPLACEMENT / FILTER REPLACEMENT METHOD
▶
Maintenance
▶
2. After separating the tting connected to the lter to replace, please
replace the lter. (Separate the tting using the proper tool.)
3. Align the grooves of the front cover to the product and close the cover.
Use new lters only after washing.
- Plus sediment lter: Install after washing with source water for about 10
seconds.
- Pre-carbon lter: Install in reverse and install after washing with source water
for about 3 minutes.
- RO membrane lter: Install the main water supply valve and install after
washing with source water for about 5 minutes.
- Plus inno-sense lter: Install with no separate ushing.
Tips
When you are replacing lters, please make sure that a corresponding lter
and a hose are rmly connected and that there is no leakage.
It is recommended to empty the water tank lled with the ltered water at
least one time right after the lter replacement.
Tips
To Next Page
Loading...
