Coway CPE-06ALW - Page 19

18
Maintenance
INSTALLATION
Be cautious!
 Water ltration device installation place 1
Pleaseinstallthewaterltrationsystemnotataroughplace,adamp
place,aplacewheretheunitisexposedtothedirectsunlight,a
placewheredustispresent,oraplacethatthewaterdrops.
 Water ltration device installation place 2
Pleaseinstallattheplacewhereitis10cmormoreofromthewall
andthebottomisatandrm.
 After installing the water ltration system
Filteredwater:Fillthewatertankwiththeltratedwaterandremove
thewatertwiceormoreifnecessaryafterinstallingit.
Ionwater:Fillthewatertankwiththeionizedwaterandremovethe
watertwiceormoreifnecessaryafterinstallingit.
Removingmoisture:Removemoistureanddustfromtheoperating,
displayandconnectingpartsofthefrontcover.
 Cold water plumbing
Pleaseconnecttothecoldwaterpipenecessarily.(Ifyouconnectto
thewarmwaterpipe,theltercanbedamaged.)
 Movement and installation
Whenthepositionismoved,connectthepowercordwhen30
minutespassesafterinstalling.
Tomaintainoptimalproductperformance,consultaCowayengineerforthedetailed
installationmethods.
Theremaybesomewaterremaininginsideofthelterwhichwasusedtotestthe
productduringinspectionprocessatthefactory.
Pleasefeelateasyanduseasitisn’ttheusedproduct.
Don’treusethemainwatersupplyvalveandhosethatwaspreviously
usedwhenyouinstalltheproduct.
Tips
Co l d w a t e r
p l u m b i n g