Coway CPE-06ALW - Page 25

24
Maintenance
FILTER REPLACEMENT METHOD
3. After separating the tting connected to the lter to replace, please
replace the lter.(Separate the tting using the proper tool.)
4. Connect all the cables and close the front cover making sure to align the
groove. Fasten the xing screw of the top of the product with a screw
driver and close the top cover.
2 31
Bychangingthelterandconnectingthettingandthehoseprecisely,
checkthatthereisnoleakageanddraintherstlteredwaternecessarily.
Tips
Pleasebesuretouseanewlteraftercleansing.
- Plussedimentlter:Installaftercleaningwiththemainwaterforabout3minutes.
- Pre-carbon/Finepostcarbon/Inno-senselter:Pleaseassembleitaftercleansing
itwiththewaterpassedthrough
theplussedimentlterforabout3
minutes.
- Membranelter:Pleaseassembleitaftercleansingitwiththewaterpassed
throughtheplus-sedimentlterandthepre-carbonlterfor
about3minutes.
Tips