19
04
Saddle
02 Take out the battery
To change the saddle height,
you’ll first need to take out the
battery using one of the battery
keys provided.
03 Adjust the height
Loosen the saddle by turning
the Butterfly Allen key 4 in the two
holes as shown. The torque value
is 5 Nm. Then raise or lower
the saddle to where you want it,
being careful not to raise it higher
than the depth warning mark
indicated on the saddle post.
Use the Butterfly Allen key again
to secure it in place.
01 Find the right position
Let’s work out your perfect saddle
height. Sit on the bike and move
the pedal around with your foot until
it’s closest to the ground in the
6 o'clock position. You’ll know the
saddle is the right height when your
leg is just slightly bent as shown.
The insertion-depth warning mark
on the seat post should not be
visible when the saddle is adjusted
to its proper height.
18
Butterfly allen key 4
To Next Page
Loading...
