1716
03
Pedals
16
L R
01 Compare pedals
The right and left pedals are
different. You can tell them apart
by their position in the box and the
small 'L' and 'R' markings on the
left of the axle.
03 Tighten up
Insert the shorter end of Allen key
6 into the screw head on the side
of the pedal closest to the frame.
Tighten firmly.
02 Screw in
Take the right pedal and screw it
in clockwise as far as you can by
hand. It should screw in easily. If
it doesn’t, stop right away as you
may be crossthreading the screw.
Make sure the pedal is properly
aligned before trying again.
Repeat these steps for the left pedal,
screwing anticlockwise this time.
Scan the QR code to watch a tutorial.
Allen key 6
Side indication on
inside face of pedal
16
To Next Page
Loading...
