116
Set Dynamic Range
This setting adjusts the audio spectrum for digital programming. Dynamic Range refers to the difference between
the highest audio peaks and the lowest ones. Action movies, for instance, will use the full dynamic range while news
programs will not. The Dynamic Range preference lets you control the volume of the high audio peaks. You have three
choices:
• Wide: Plays the entire audio dynamic range, including and highest and lowest sounds. This setting is
appropriate for audio enthusiasts.
• Medium: Slightly lowers the higher volumes.
• Narrow: Dramatically lowers the higher volumes. This setting is specific to each receiver.
To adjust these settings, begin at the Audio Settings Menu:
1. Use the UP or DOWN arrow to select Dynamic Range.
2. Press the RIGHT arrow or SELECT button to move the highlight bar to the Dynamic Range
options in the center card.
3. Use the UP and DOWN arrow to make the appropriate choice. Press SELECT.
4. Press the LEFT arrow three times to return to the Settings Menu or press EXIT to return to live television.
Set Video Output Format
You can change the video output format to ensure you get the highest quality picture that your television can display.
These settings include the picture Resolution and Available Output Format options. Please refer to the manufacturer’s
information for your television to get the proper settings. The resolution options are:
• 1080i Wide
• 720p Wide
• 480p Wide
• 480p Standard
• 480i Standard
To Next Page
Loading...
