115
Set Digital Output
This option lets you adjust the audio output delivered to your television while watching digital television. You have two
options:
• Pulse Code Modulated (PCM): This is the default format of digital output.
• Dolby Digital: If you have a unit that can receive and decode Dolby Digital output, use this option.
This setting is specific to each receiver.
To adjust these settings, begin at the Audio Settings Menu:
1. Use the UP or DOWN arrow to select Digital Output.
2. Press the RIGHT arrow or SELECT button to move the highlight bar to the Digital Output options in the center
card.
3. Use the UP and DOWN arrow to make the appropriate choice. Press SELECT.
4. Press the LEFT arrow to return to the Audio Settings Menu or press EXIT to return to live television.
Set Audio Language
This option turns on a secondary audio track for programs that carry the SAP signal. When SAP is available, the program
description in the Guide displays an SAP icon.
This setting is specific to each receiver.
To adjust these settings, begin at the Audio Settings Menu:
1. Use the UP or DOWN arrow to select Audio Language.
2. Press the RIGHT arrow or SELECT button to move the highlight bar to the Audio Language options in the
center card.
3. Use the UP and DOWN arrow to make the appropriate choice. Press SELECT.
4. Press the LEFT arrow to return to the Audio Settings Menu or press EXIT to return to live television.
To Next Page
Loading...
