121
Receivers
Receivers let you manage settings associated with your receivers in the home as well as your Whole Home DVR service.
AC Outlet
Certain receivers (set top boxes) feature a
convenient AC outlet on the rear panel that lets you
turn both the TV and receiver off with a single press
of the POWER button. To control the AC Outlet,
begin at the Settings Menu:
1. Use the UP or DOWN arrow to highlight
Receivers. Press the RIGHT arrow or SELECT
button to open the Receivers Menu in the
center card.
2. Use the UP or DOWN arrow to highlight AC
Outlet and press SELECT or RIGHT arrow.
3. Use the UP or DOWN arrow to choose
Always On or On With Receiver. Press
SELECT.
4. Press the LEFT arrow to return to the
Receivers Menu or press EXIT to return to
live television.
Note: The On With Receiver option will always turn the TV and receiver off at the same time. Depending on the model
of your TV, however, you may need to turn on the TV and receiver separately. Also, some TV models take longer to warm
up when they are plugged into the receiver’s AC outlet. In these cases, you may prefer to set AC Outlet Use to Always
On or plug your television directly into a wall outlet.
Front Panel Display Options
You can control what information the front panel displays.
To change these options, begin at the Receivers Menu:
1. Use the UP or DOWN arrow to highlight Front Panel Display Options. Press the RIGHT arrow
or SELECT button to open the Front Panel Display Options Menu in the center card.
2. Use the UP and DOWN arrows to choose which information to display on
your receiver’s front panel. PressSELECT.
3. Press the LEFT arrow three times to return to the Settings Menu. Press EXIT
to return to live television.
Highlight Receivers and then press SELECT to move the
highlight bar to the options list in the center card.
To Next Page
Loading...
