COX MINI BOX BIG BUTTON REMOTE CONTROL User Manual

12
ADVANCED SETUP:
ASSIGNING VOLUME
CONTROLS
The remote is set to control
the volume on the mini box
(DTA) when you take it out of
the box. Once you program
your remote to control the
TV, the volume controls will
switch to operating the TV. The
instructions below can be used
to manually assign the volume
controls on the remote.
ASSIGN VOLUME CONTROL
TO THE MINI BOX (DTA):
1. Press and hold the
SETUP button for 3
seconds until the red
indicator light turns on,
then release.
2. Press and release the
VOL - button.
3. The red indicator light
will blink twice to
indicate success.
ASSIGN VOLUME CONTROL
TO TV:
1. Press and hold the
SETUP button for 3
seconds until the red
indicator light turns on,
then release.
2. Press and release the
VOL + button.
3. The red indicator light
will blink twice to
indicate success.

COX MINI BOX BIG BUTTON REMOTE CONTROL Specifications

General

Brand	COX
Model	MINI BOX BIG BUTTON REMOTE CONTROL
Category	Remote Control
Language	English