13
ADVANCED SETUP:
RESET YOUR REMOTE
RF UNPAIRING:
If you wish to unpair your
remote from the RF DTA or the
mini box with an RF adapter,
follow the steps below.
1. Press and hold the
SETUP button for 3
seconds until the red
indicator light turns
on, then release.
2. Enter 986 using the number
buttons on the remote.
3. The red indicator light
will blink twice to
indicate success.
FACTORY RESET:
If you wish to completely
reset the remote by
removing the RF pairing and
programming for the TV’s
power and volume functions,
follow the steps below.
1. Press and hold the
SETUP button for 3
seconds until the red
indicator light turns
on, then release.
2. Enter 987 using the number
buttons on the remote.
3. The red indicator light
will blink twice to
indicate success.
To Next Page
Loading...
