EasyManua.ls Logo

Coyote CCX3 - Page 11

Coyote CCX3
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
gasflow,untilapositivesealhasbeenobtained.
- Thecylindermustbearrangedforvaporwithdrawal.Itmust alsoincludea
collar to protect the cylinder valve. A safety relief device having direct
communicationwiththevaporspaceofcylindermustbeprovided.Thiswill
expel high pressure gas
if the cylinder is overfilled or overheated which
couldresultinfireorexplosion.
- All L.P. gas cylinders used with this appliance shall be constructed and
markedinaccordancewiththespecificationsforL.P.gascylindersoftheU.
S.DepartmentofTransportation(DOT)ortheNationalStandardofCanada,
CAN/CSAB339, Cylinders, Spheres and Tubes for Transportation of
Dangerous Goods; and Commission, as applicable; and shall be provided
withalistedoverfillingpreventiondevice.
- ReadlabelsontheL.P.GasSupplyCylinder.
- Newcylindersarealwaysshippedemptyforsafety.
- AllowonlyqualifiedL.P.gasdealerstofill
orrepairyourL.P.gassupplycylinder.
- Informthegasdealerifitisaneworusedcylindertobefilled.
- Afterfilling,havethegasdealercheckforleaksandtoseethatthereliefvalveremainsfreetofunction.
HoseandRegulator(Comesstandardwiththegrill)
TheType1connectionsystemhasthefollowingfeatures:
- The system will not allow gas to flow until a positive connection has
beenmade.
NOTE: The cylinder control valve must be turned off before any
connectionismadeorremoved.
- The system has a thermal element that will shut off
the flow of gas in
theeventofafire.
- The system has a flow limiting device which, when activated, will limit
theflowofgasto10cubicfeetperhour.
- NEVERusegrillwithoutleaktestingthisconnection.
LP(Propane)GasSupplyConnection
1. The tank valve should be in the “OFF” position. If not, turn the knob
clockwiseuntilitstops.
2. Makesureallburnervalvesareinthe“OFF”position.
3. Alwaysconnectthegassupplyregulatorasfollows:
Insert the regulator inlet into the tank valve and turn the coupling nut
clockwiseuntilthecouplertightensup(seepicture).Donotovertightenthe
coupler.Turnthemaintankvalveonand turntheburnercontrolvalveson
theunittothe“HIGH”positionforabout20secondstoallowtheairinthe
systemtopurgebeforeattemptingtolighttheburners.

Related product manuals