Step 4 Set unlock pattern.
Figure 5
After set unlock pattern, device goes to password protection interface. See Figure 6
Note
The unlock pattern shall at least contain 4 grids.
Device adopts unlock pattern to login by default if you have set pattern here. If there is no unlock
pattern, please input the password to login.
Click Skip if there is no need to set unlock pattern.
Figure 6
Step 5 Set security questions.
Note
After setting the security questions here, you can use the email you input here or answer the
security questions to reset admin password.
Cancel the email or security questions box and then click Next button to skip this step.
To Next Page
Loading...