CPI GRYPHON Technician Guide

Gryphon™ coin changer
technician guide
©
2023 Crane Payment Innovations. All rights reserved.
support@cranepi.com
CPI support
1
v
1.0 EN
Components
Key coin changer components are identified below.
No. Item Description
1
Coin return
Press to reject a coin and open the validator door.
2
Validator latch
Pull to remove the validator assembly.
3
Man machine
interface (MMI)
Use this screen and keypad to interact with and
update the coin changer.
4
Diagnostic LEDs
Displays the status of the coin changer with red,
amber, and green LEDs.
5
Cassette
Stores coins for dispensing as change.
6
Dispenser
Dispenses coin returned as change.
7
Cassette release
tab
Lift and pull to remove cassette from main housing.
8
Micro USB port
Connect to a PC or USB memory stick for reading
audits, changing settings, and updating firmware.
Keypad
The MMI screen displays messages related to current operational status and menu selections.
Always follow on-screen messages. See menu navigation tips below.
No. Description
1
Display
2
Press keys A-F to navigate user menus. See Symbols for details.
Keys A-F are also used to dispense coins from corresponding tubes
when in normal operating mode.
3
Move left
4
Move right
5
Scroll up
6
Scroll down
7
Previous page
8
Next page
9
Press to access
Service
and
Setup
menus.
Press once to display previous menu.
Hold for 3 seconds to return to home screen.
10
Diagnostic LEDs: red, amber, and green.
2
3
5
4
6
7
8
1
10
9
1
3
4
5
6
2
7
8

CPI GRYPHON Specifications

General

Brand	CPI
Model	GRYPHON
Category	Cash Counters & Coin Sorters
Language	English