To Next PageTo Next Page
Need help?Do you have a question about the CPI OLIVER CITY and is the answer not in the manual?
Guidance on pre-ride checks, manual importance, and vehicle setup for safe operation.
Information on prohibited modifications, legal consequences, and warranty voidance.
Details on VIN and engine number, their significance and location for identification and registration.
Explains dashboard instruments like speedometer, odometer, fuel, and indicator lights.
Explains the function and positions of the ignition lock for starting/stopping the engine.
Details the location and operation of the starter button for engine ignition.
Describes the operation of the headlight switch for off, parking, and driving lights.
Explains the dimmer switch for high beam, low beam, and headlamp flasher functions.
Describes how to operate the horn and when it sounds.
Instructions for activating and deactivating the direction indicators, and their function.
Details how to lock and unlock the steering to prevent theft.
Information about the helmet box under the seat, its capacity, and usage precautions.
Step-by-step guide for starting the engine using the electric starter.
Instructions for starting the engine using the kickstarter if electric start fails.
Emphasizes paying attention to traffic before riding and initial vehicle movement.
Explains how throttle grip position affects vehicle speed (acceleration/deceleration).
Recommendations for the initial break-in period to ensure engine longevity and tire adhesion.
Advice on effective braking techniques and avoiding slides during turns.
Precautions for riding in wet conditions, including braking and downhill riding.
Tips on hazard perception, cornering, and speed management for rider safety.
Procedure for safely stopping the vehicle, using indicators and brakes.
Steps for parking the vehicle, including switching off the engine and indicators.
Guidelines for selecting a safe parking spot and securing the vehicle.
Instructions for checking fuel level and refueling, including safety precautions.
How to check the steering for smooth operation and potential issues.
General overview of brake system checks.
Specific instructions for checking and adjusting the rear drum brake free play.
Procedures for checking front disc brake fluid level and brake pads.
Notes on reduced braking efficiency in wet conditions and how to dry brakes.
Information on how salt affects braking and the need for cleaning.
Consequences of dirty brake discs and pads on performance.
How to check the function of the stop light.
How to check the function and condition of the direction indicators.
Instructions for checking tire pressure, tread, and condition.
Method for checking the function of front and rear shock absorbers.
Checking all lights, including headlight adjustment.
Checking the horn function.
Checks for the speedometer spindle and gear.
Checking the adjustment and condition of the back mirrors.
Information on the maintenance-free battery and its precautions.
Step-by-step guide for removing and installing the battery.
How to check and replace fuses for electrical equipment.
General precautions and steps for replacing vehicle bulbs.
Procedure for replacing the headlight bulb.
Procedure for replacing front and rear direction indicator bulbs.
Procedure for replacing the tail and stop light bulb.
Importance of correct low beam adjustment and consulting a dealer.
How to inspect and maintain rubber bushings on cables.
General| Fuel System | Carburetor |
|---|---|
| Front Brake | Disc |
| Rear Brake | Drum |
| Front Suspension | Telescopic Fork |
| Width | 700 mm |
| Cooling System | Air |
